<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=510909843246188&amp;ev=PageView&amp;noscript=1">
Skip to content
Industries
Where to use?
Materials
Resources
Premix Group
Sustainability

Making Material Choices More Transparent: Product Carbon Footprint Data Now Available

November 18, 2026 |
Post image

When choosing a plastic compound, you need to know how it performs. Today you also need to understand the environmental impact. At Premix, we want to make both sides of that decision easier.

We have now published product specific carbon footprint documents for our most popular products to help customers and partners understand the climate impact of our materials. Making this information publicly available gives stakeholders a practical starting point for their own climate actions. 

 

What does a product carbon footprint tell you?

A product carbon footprint (PCF) focuses specifically on climate impact. It is not a complete assessment of a product’s sustainability, but it answers an important question: how the product contributes to climate change.

PCF calculates the greenhouse gas emissions associated with a product within a defined scope. The climate impact of all relevant greenhouse gas emissions is expressed as carbon dioxide equivalents (CO₂e), a standard unit that allows different greenhouse gases to be compared on a common scale. CO₂e represents the amount of CO₂ that would be needed to have same impact on global warming as the emissions being measured.

The scope matters. A calculation covering raw material production, transport to the compounder and compounding is often called “cradle-to-gate”. It does not describe the entire life of the finished application. A calculation that covers the whole life cycle from raw material extraction to end-of-life is called “cradle-to-grave”. When comparing figures, the calculation boundaries, methods and assumptions need to be comparable. 

 

What is behind the figures? 

Our PCF documents explain both the carbon footprint of the product, expressed in CO₂e, and how it was calculated. The calculations follow ISO 14067, the international standard for quantifying and reporting product carbon footprints.  

The results are reported in kilograms of CO₂e per tonne of finished granules produced at our Rajamäki plant in Finland. Our PCFs cover raw material procurement and processing (A1), transport to our plant (A2) and manufacturing (A3). This cradle-to-gate scope stops at the factory gate: further processing, use and end-of-life treatment are not included. The documents also state the reporting period and show how each stage contributes to the total.

We use supplier-specific emission data where available, with industry averages or estimates filling the gaps. Manufacturing emissions, for example electricity, fuel, ancillary materials and waste treatment, are calculated at company level and allocated evenly per tonne of production. 

 

Useful information for responsible decisions 

For our customers, a compound is one part of their product. The compounds’ carbon footprint becomes an input into their own calculations, alongside other materials, processing, transport, and further stages of the product’s life. Product-specific data can reduce reliance on and use of broad industry averages and help customers understand the contribution of the materials they purchase.

This information can support product development, purchasing decisions, and answer customers’ environmental questions. It can also contribute to Scope 3 reporting: the emissions in a company’s value chain, including the impact of purchased materials, and help set target and formulate actions to reduce company carbon footprint. For other stakeholders, public documents make it easier to look beyond company-level commitments and understand climate impact at product level.

Material selection still needs to account for performance, reliability, and processing requirements. Carbon footprint data adds another useful piece to that discussion, helping customers consider climate impact alongside the properties their application needs. 

 

Opening up the numbers 

We want to help move the compounding industry towards more open, product-specific environmental information. Sharing numbers is part of that responsibility. It also gives us a basis for identifying where improvements matter most, from raw material choices to production.

Publishing a carbon footprint does not, on its own, reduce emissions. It makes them visible. That is the first necessary step towards reducing them, and one we want to take to make the next step, reducing emissions, easier to plan for both us and our customers  

▸ Explore the new product carbon footprint documents

 

Premix PCF calculation methodology has been verified by Reforest Finland Oy

Teemu Korpi

Teemu Korpi

Teemu Korpi is a Product Development Manager at Premix Group. Responsible for managing product development projects while also supporting environmental sustainability initiatives across the organization. In addition to product development projects, Teemu works extensively with carbon footprint calculations, sustainability data analysis, and related reporting (e.g. Ecovadis, ESG-reports) to help improve environmental performance and support the organization.